SAA certification is the standard organization of Australia, which is the certification of Standards Association of Australia, so many friends call it Australian certification. Electrical products entering the Australian market must comply with SAA certification. There are two kinds of SAA logo, one is formal recognition, the other is standard logo. Formal certification is only responsible for the sample, and the standard mark is to be reviewed by each factory. The certification scope of SAA is mainly divided into quality management system; Environmental management system; Occupational health and safety management; Information security management; The cycle of applying for SAA certification in Australia for common products is 3-4 weeks. If the product quality does not meet the standard, the date may be extended. If the product is not certified, it will be detained or confiscated or fined.
Applicable product range:
SAA certification control products can be divided into mandatory electronic products and non mandatory electronic products
1. Mandatory electrical products cover 56 categories of products, such as external power supply or charger, wire, plug, home appliances (60335-2-9, - 14, 15, - 23, - 80), lamps (60598-2-4), etc. The controlled electrical appliances must obtain the certificate of approval issued by the monitoring department, namely SAA certification, and must be marked with the certificate number.
2. Non mandatory electrical products refer to products other than compulsory certification, such as commercial kitchen appliances. Although it is not compulsory to obtain certification for non regulated products, the seller / manufacturer is responsible for their safety and can voluntarily apply for certification. The monitoring department will issue the certificate of sustainability to the products that meet the requirements of the standard. The electrical products that have obtained the certificate can be marked with the certificate number, and the last letter of the certificate shows which state or region the certificate is issued.
SAA certification application materials:
1. Application form
2. CB certificates and reports
3. Product label (with corresponding certification mark)
4. PCB printed circuit board
5. Current filter description
6. Converter manual
7. Product photos
8. List of key components (usually required for direct application cases)
9. Key component certificate
10. User's Manual (in English or in the language of the certification country)
11. Plug test report (auplugtestreport required by SAA)
